Power Capacitors
LIFASA capacitors are manufactured using the most advanced technologies, coming from an in depth knowledge of the
manufacturing process and also from very strict laboratory
and R+D tests. The enormous experience in installations,
acquired over many years, allow us to incorporate in the
new design the necessary characteristics to optimize the use
of the product.
Capacitors are composed of capacitive elements wound
from low loss polypropylene film. This dielectric is vacuum
metallized, what gives it an excellent self-healing characteristic (MKP).
Elements are covered with a thermohardening resin of high
dielectric properties and are not oil filled. Elements are connected to obtain the required reactive power and are mounted in steel cases. Void spaces between elements and the
case are filled with a non-flammable, inert and non toxic
material. Each element is individually protected.
This construction system avoids any risk of explosion of
the capacitor and meets all the tests specified in the -1 and -2 standards.
Advantages
Capacitors are dry type and consequently ecologically
safe: there is no possibility of impregnating liquid leakage.
Losses are specially reduced: lower than 0.05% (< 0.5
W/kvar).
Capacitors are a self-healing type: in case of a dielectric
breakdown, due for example, to a transient over- voltage,
the self-healing mechanism vaporizes the metallic electrode
around the breakdown point, allowing the capacitor to go on working normally.
Their weight and volume are very low, allowing them to be
installed every-where without problems.
Capacitors use strong terminals that guaratee a fast and
safe connection.
Capacitors, cover with their different series, a wide range
of power and voltages to satisfy the most varied requirements.
POLT THREE-PHASE CYLINDRICAL CAPACITOR
Self-healing capacitors with low losses metalized polypropylene dielectric. They
have an overpressure disconnection system that disconnects the capacitor in case of
any internal failure. Capacitors in cylindrical aluminium cans, provided with a M12
stud for fixing and earthling.
Connection is made by a double 6.35 mm Faston terminal. Optionally, provided
with discharge resistors for external connection. These capacitors are especially sui
table for the individual compensation of small inductive loads and the construction
of small capacitor banks. They have discharge resistors externally fitted.
t echnical characteristics
Tensión nominal/Rated voltages..............................230/400/440 V 50Hz
230/400 V 60Hz
Dieléctrico/Dielectric .................................................Polipropileno/Polypropylene
Resistencias descarga/Discharge resistors ............Accesorio/Accessory
Pérdidas dieléctricas/Dielectric losses ...................< 0.2 W/kvar
Pérdidas totales/Total losses ...................................< 0.4 W/kvar
Sobretensión máx./ Max. Overvoltages ...............1.1 Un (8h/dia/day)
Sobreintensidad máx./ Max. Overcurrent ...........1.5 In
Nivel aislamiento/Isolation level .............................3/- kV rms
Tolerancia de potencia/ Power tolerance .............-5/+10 %
Gama climática/Climatic range ............................-25/+55oC
Conexión/Connection ................................................Faston doble 6,35mm/
Double faston
Protección/ Protection ...............................................
(con caperuza/with hood)
Normas/Standards ...................................................., ,
Part Number |
50 Hz |
60 Hz |
Dimensions
D x L |
Weight
(kg) |
Price
() |
230V |
400V |
440V |
230V |
400V |
Qn
(kvar) |
In (A) |
Qn
(kvar) |
In (A) |
Qn
(kvar) |
In (A) |
Qn
(kvar) |
In (A) |
Qn
(kvar) |
In (A) |
POLT44005 |
0.1 |
0.3 |
0.4 |
0.6 |
0.5 |
0.7 |
0.2 |
0.4 |
0.5 |
0.8 |
50x151 |
0.3 |
39,79 |
POLT44012 |
0.3 |
0.86 |
1 |
1.5 |
1.25 |
1.6 |
0.41 |
1 |
1.25 |
1.8 |
50x151 |
0.3 |
40,83 |
POLT44015 |
0.4 |
1 |
1.2 |
1.8 |
1.5 |
2 |
0.5 |
1.2 |
1.5 |
2.3 |
50x151 |
0.3 |
40,90 |
POLT44025 |
0.66 |
2.8 |
2 |
3 |
2.5 |
3.3 |
0.83 |
3.4 |
2.5 |
3.8 |
50x151 |
0.3 |
60,75 |
POLT44030 |
0.83 |
3.4 |
2.5 |
3.6 |
3 |
3.9 |
1 |
4.1 |
3 |
4.5 |
50x151 |
0.3 |
70,59 |
POLT44050 |
1.33 |
5.7 |
4 |
6 |
5 |
6.6 |
1.66 |
6.8 |
5 |
7.5 |
65x155 |
0.5 |
74,00 |
POLT44062 |
1.66 |
7.1 |
5 |
7.5 |
6.25 |
8.2 |
2.1 |
8.5 |
6.25 |
9.4 |
75x155 |
0.7 |
80,00 |
POLT44075 |
2.1 |
8.5 |
6.25 |
8.9 |
7.5 |
9.8 |
2.5 |
10.2 |
7.5 |
11.3 |
75x215 |
1 |
82,00 |
Other power, voltages and frequencies on request.
Cylindrical capacitors POLT
POLT44012 POLT44015
POLT44025 POLT44030
POLT44050 POLT44062
POLT44075 POLT44005
|